ignition replacement

[rppjr]

on my 03 zx6r the ignition went out. ( it only stays in on or the position with the park lights on) i found the parts on ron ayers, anybody have a how to on this? it looks like the bolts holding it in are the type where the heads break off. any idea how to remove them...

thanks bob

[chicozx10]

Take of the top tree center punch it then start with a thin drill to get the hole central then either use an easyout.
http://brokentap.com/easy-outs.html
or drill it out.

[xtremewlr]

Easy out like Chico said or use a larger drill bit and remove the head that you can see like you would with a rivet. Kind of a pain either way, I had to do it with mine a while back. I just used normal bolts when I put it all back together.