just a couple things

[schropzx6r]

So i did my jumper mod two weeks ago and boy is there a big difference up top!! but every time i start it i get a clicking sound from the jumper connection. is that normal? its almost like an electrical zap/clicking from it engaging. also did anybody notice a difference down low after the jumper, it feels like i lost that snap hittin 9 grand.. or maybe im losin it used a paper clip for the connection, sorry for all the questions guys but i have one more. I'm a newbie and was lookin to post some pics of her just cant figure it out. thanks alot for the help

[Nick.INF]

my buddy did the jumper mod on 6r, and he said it pulls like a raped ape after 8k rpm

[schropzx6r]

well ask your buddy if he gets that clickin noise at the jumper connection when he starts it

[ZX-10R_Sinner]

Well first off a paper clip isn't the way to go. I did this to a kids 08 and just a butt connector and just clipped the wires. At the same time we put on the Area P slip on and a PCIII and at around 14,000rpm he gained 23 hp, 10 hp peak with everything done. So anytime you can do a mod like that and gain that much hp anywhere it's a VERY good thing. If you own a 6R and modify it, the jumper mod should be your first.

[schropzx6r]

paper clip is fine! and your way as well, but when i get it serviced its real easy to disconnect the paper clip but a bitch to rewire after cuttin it. could anybody fill me in on how to post pics. thank you

[zero4o3]

Originally Posted by schropzx6r

paper clip is fine! and your way as well, but when i get it serviced its real easy to disconnect the paper clip but a bitch to rewire after cuttin it. could anybody fill me in on how to post pics. thank you

paper clip is not shielded, maybe its grounding out some were or your hearing the power jump to the paper clip, for the ticking noise your talking about

[schropzx6r]

yeah its prob the power jump, cause i cut it down to a staple size and insulated it with electrical tape so it wouldn't ground anywhere. I think ill try to redo it and get those connectors that fit in the holes and just use a piece of copper wire for the jump

[cpriordan]

i used a paper clip bent like a U and put electrical tape in the middle, works great, i really notice the mod when i am revving the piss out of the old bitch in the canyons